G Series
Original AirTAC GZ200-06 GZ200-08 GZ300-08 GZ300-10 GZ300-15 GZ400-10 GZ400-15 Air Control Preparation Unit
  • GZ200-06
  • GZ300-10
  • GZ400-10
  • GZ200-08
Original AirTAC GZ200-06 GZ200-08 GZ300-08 GZ300-10 GZ300-15 GZ400-10 GZ400-15 Air Control Preparation Unit

Product Name:GZ Series Air Control Preparation Unit
Product Model:GZ200-06 GZ200-08 GZ300-08 GZ300-10 GZ300-15 GZ400-10 GZ400-15
Filtering Grade:40μm or 5μm
Fluid: Air
Max Supply Pressure:1.0MPa(145psi)
Proof Pressure: 1.5MPa(215psi)

GZ200-06 GZ200-08 GZ300-08 GZ300-10 GZ300-15 GZ400-10 GZ400-15
Fluid: Air
Port Size: PT1/8 PT1/4 PT1/4 PT3/8 PT1/2 PT3/8 PT1/2
Exhuast Port Size: 1/4" 3/8" 1/2"
Acting Type: Manual
Valve Type: 3 Port 2 Way
Pressure Range: 0~0.9MPa(0~130psi)
Proof Pressure: 1.5MPa(215psi)
Temperature Range: -20~70℃
Capacity of Drain Bowl: 90°
Weight: 135g 360g 680g 1440g

①PT thread, NPT thread and G thread are available.

Product Feature:
1.It is module design and can be used with G series F.R.L. combination by bracket.

2.This valve can be used as manual 3/2 way valve.

3.Visual indication marked EXH/SUP.

4.This valve meets the standard on installation conducted by operator specified by OSHA (Occupational Safety & Health Administration). When the machinery is maintained and serviced, the purge valve (Safe on-off valve) for remaining pressure shall be used to eliminate the remaining pressure when the air source is cut off. Valve must be locked to prevent accidental operation by a third party during maintenance. This prevents accidental system pressurization & cylinder actuation which can result in injuries to the machine operator.

Installation & Usage:

1.Check whether the components have been damaged during transportation before installing and using.

2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.

3.Please notice whether installation condition accords with technical requirements (such as “working  pressure” and “applied temperature range”);

4.Avoid usage in an environment that exposes the filter and lubricator bowl through contact with Chlorine, solvent, aromatic essence, acid and alkali to avoid damage to the Filter and Lubricator bowl.

5.Regularly clean or change filter core. Lubricators and regulators shall be in descending order.

6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.

Order Code:

GZ Series.jpg

Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight ? 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粵ICP備14001694號-由萬創科技提供技術支持